差異處
這裏顯示兩個版本的差異處。
| 兩邊的前次修訂版 前次修改 下次修改 | 前次修改 | ||
| tech:debian_net_tips [2022/01/23 13:43] – jonathan | tech:debian_net_tips [2022/01/23 21:38] (目前版本) – jonathan | ||
|---|---|---|---|
| 行 2: | 行 2: | ||
| 因為設備有 wifi 網卡與 Ethernet 網卡, 安裝時只有自動抓到有線網卡, | 因為設備有 wifi 網卡與 Ethernet 網卡, 安裝時只有自動抓到有線網卡, | ||
| * 設定環境 PVE 7.1 (debian_version : 11.2 Bullseye) | * 設定環境 PVE 7.1 (debian_version : 11.2 Bullseye) | ||
| + | * 預計連上 SSID : **ichiayi** WiFi AP | ||
| ===== 設定程序 ===== | ===== 設定程序 ===== | ||
| 行 13: | 行 14: | ||
| lrwxrwxrwx 1 root root 0 Jan 23 13:06 eno1 -> ../ | lrwxrwxrwx 1 root root 0 Jan 23 13:06 eno1 -> ../ | ||
| </ | </ | ||
| + | - 用 WiFi AP 的 SSID/密碼 產生連上 psk< | ||
| + | root@nuc:~# wpa_passphrase ichiayi **ichiayi_password** | ||
| + | network={ | ||
| + | ssid=" | ||
| + | # | ||
| + | psk=1dfdf**************************************************1087dcd52 | ||
| + | } | ||
| + | </ | ||
| - 建立 WPA 認證相關設定檔案< | - 建立 WPA 認證相關設定檔案< | ||
| mkdir -p / | mkdir -p / | ||
| 行 24: | 行 33: | ||
| network={ | network={ | ||
| ssid=" | ssid=" | ||
| + | proto=WPA2 | ||
| key_mgmt=WPA-PSK | key_mgmt=WPA-PSK | ||
| - | psk="**ichiayi_wifi_password**" | + | psk=1dfdf**************************************************1087dcd52 |
| } | } | ||
| </ | </ | ||
| 行 31: | 行 41: | ||
| : | : | ||
| auto wlp0s20f3 | auto wlp0s20f3 | ||
| - | iface wlp0s20f3 inet static | + | iface wlp0s20f3 inet dhcp |
| - | address 192.168.11.5 | + | |
| - | netmask 255.255.255.0 | + | |
| - | wireless-essid ichiayi | + | |
| pre-up wpa_supplicant -B -Dwext -iwlp0s20f3 -c/ | pre-up wpa_supplicant -B -Dwext -iwlp0s20f3 -c/ | ||
| post-down killall -q wpa_supplicant | post-down killall -q wpa_supplicant | ||
| : | : | ||
| </ | </ | ||
| - | - 使用 ifup 啟動 | + | - 啟動 |
| systemctl restart wpa_supplicant | systemctl restart wpa_supplicant | ||
| - | ifup wlp0s20f3 | + | </ |
| + | - 重啟網路服務< | ||
| + | systemctl restart networking.service | ||
| + | </ | ||
| + | - 驗證是否正常連上 WiFi AP< | ||
| + | wpa_cli -i wlp0s20f3 | ||
| + | </ | ||
| + | root@nuc:~# wpa_cli -i wlp0s20f3 status | ||
| + | bssid=28: | ||
| + | freq=0 | ||
| + | ssid=ichiayi | ||
| + | id=0 | ||
| + | mode=station | ||
| + | wifi_generation=5 | ||
| + | pairwise_cipher=CCMP | ||
| + | group_cipher=TKIP | ||
| + | key_mgmt=WPA2-PSK | ||
| + | wpa_state=COMPLETED | ||
| + | ip_address=192.168.31.251 | ||
| + | address=04: | ||
| + | uuid=14ea0bcc-c7f5-592c-ba49-159bbe31e49d | ||
| </ | </ | ||
| - 使用 ip addr show wlp0s20f3 就可看到目前的設定< | - 使用 ip addr show wlp0s20f3 就可看到目前的設定< | ||
| 行 47: | 行 74: | ||
| 3: wlp0s20f3: < | 3: wlp0s20f3: < | ||
| link/ether 04: | link/ether 04: | ||
| - | inet 192.168.11.5/24 scope global wlp0s20f3 | + | inet 192.168.31.251/24 brd 192.168.31.255 |
| - | | + | |
| - | inet6 2001: | + | inet6 fe80:: |
| - | | + | |
| - | inet6 fe80:: | + | |
| | | ||
| </ | </ | ||
| + | |||
| + | < | ||
| + | * 如果有修改 / | ||
| + | root@nuc:~# wpa_cli -i wlp0s20f3 reconfig | ||
| + | OK | ||
| + | root@nuc:~# wpa_cli -i wlp0s20f3 status | ||
| + | bssid=62: | ||
| + | freq=0 | ||
| + | ssid=ichiayi_n56u_5G | ||
| + | id=0 | ||
| + | : | ||
| + | </ | ||
| + | </ | ||
| + | |||
| + | <WRAP center round alert 60%> | ||
| + | **針對在 PVE 環境將 WiFi 網卡加入 Bridge 並沒有設定成功** | ||
| + | * 目前似乎是 **bridging does not work with WiFi** (主要是 VM 要使用 WiFi Bridge 的問題) | ||
| + | * 找尋的相關資料如下: | ||
| + | * https:// | ||
| + | * https:// | ||
| + | * https:// | ||
| + | * https:// | ||
| + | * https:// | ||
| + | </ | ||
| ===== 參考網址 ===== | ===== 參考網址 ===== | ||
| 行 59: | 行 108: | ||
| * https:// | * https:// | ||
| * http:// | * http:// | ||
| + | * https:// | ||
| {{tag> | {{tag> | ||